Shipping / FAQ
Qty in Basket : 0
Coupled Hose - with Fittings
Bulk Hose - without Fittings
Sewer Flushing/Water Jetter Hose/Pressure Washer
Gloves, Protective Clothing & Boots
Tools & Hose Clamps
Vacuum Pumps & Vacuum Truck Parts
RV Pump Out Kits and Adapters
Leaf Collection Hose, Landscaping
Chemicals and Cleaning Products
Water and Washdown Pumps
Hydro Excavation Hose, Parts and Tools
SCRAP HOSE SALE!
***NEW Portable Toilet Operator Supply
BULK SALE! BUY MORE, SAVE MORE!
Filters, Baffles, Alarms and Filter Accessories
Click on the column heading to sort the results
POLYLOK PL68 FILTER & TEE COMBINATION - 800GPD
PL-68 effluent filter. The housing can also be used as an inlet baffle. 800 GPD.
PL-68 Replacement Filter
Filter element for the PL-68 system.
TEE FOR THE PL68
Tee housing for PL-68 system
PL-122 EFFLUENT FILTER SYSTEM - 3,00GPD
The PL-122 was the original Polylok filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. Ideal for residential waste flows up to 3,000 gallons per day (GPD).
PL-525 EFFLUENT FILTER SYSTEM, 1/16th Filtration - 10,000GPD
The PL-525 Effluent Filter is rated for 10,000 GPD (gallons per day) making it one of the largest filters in its class. It has 525 linear feet of 1/16” filtration slots. Like the Polylok PL-122, the Polylok PL-525 has an automatic shut-off ball installed with every filter. When the filter is removed for cleaning, the ball will float up and temporarily shut off the system so solids won’t leave the tank.
PL-625 EFFLUENT FILTER SYSTEM, 1/32th Filtration - 10,000GPD
Ideal for grease trap filtration.
BEST GF10 FILTER ASSEMBLY
The GF10 Filter is 10" x 18" and is available in three filtration designs: 1/8", 1/16" and 1/32". The exterior of the GF10 filter is a single-piece case. It has no joints and no glue holding it together which gives it incredible strength. It is made of impact-resistant PVC so it can withstand harsh treatment and it won't break!
As low as: $179.00
POLYLOK HIGH PRESSURE FILTER
Polylok’s high pressure filter is perfect in difficult drainage environments, where you want to spread the effluent out as much as possible to ensure you do not clog your media, this filter will act as a second level of filtration and will keep orifice lines clean.
As low as: $242.90
POLYLOK UV DISINFECTION UNIT
Your complete solution to meet even the most stringent environmental permit requirements, the PL-UV1 UV Disinfection Unit reduces bacteria levels from secondary effluent to achieve strict water quality standards. The reliability and performance of the PL-UV1 is unmatched for onsite and decentralized treatment applications. Every component of the compact unit is highly engineered and constructed to provide reliable disinfection and superior operational life.