Tools and Accessories-Varco /

The Rotating Nozzle or Turbo Nozzle is designed to use the force generated from your hot or cold water pressure washer to clean with the impact of a zero degree flat spray nozzle, but with the pattern of a 25 degree nozzle. The Rotating Nozzles high impact 25 degree cone pattern spray easily cleans the following quickly: rust removal, tank cleaning, paint and graffiti removal, brick and masonry cleaning, concrete, gum from sidewalks and more. This indispensable pressure washer tool will easily pay for itself in no time by saving in labor cost, water and most importantly time.

As low as: $52.14

ST457

ST457 TURBO NOZZLE, 6000PSI MAX

As low as: $99.81

HYDROEX-V

HYDRO-EXCAVATOR TOOL, VACTOR / VAC-CON FLANGE

THE HYDRO-EXCAVATOR TOOL IS A LIGHTWEIGHT ATTACHMENT FOR YOUR SEWER HOSE, WITH SEWER HOSE SIZE (3/4” OR 1”) AND SUCTION TUBES SIZES (6’ OR 8’). THE WET RING HAS EITHER 4, 8 OR 10 REPLACEABLE STAINLESS STEEL JETS ACCORDING TO YOUR GPM AND PSI. JETS ARE SLIGHTLY ANGLED AND ZERO DEGREES. BOTTOM RUBBER CUFF PROVIDES PROTECTION.

AVAILABLE TO FIT EITHER 6in OR 8in PIPE.

As low as: $540.00

DTPL

DIG TUBE PROTECTOR WITH INNER LEDGE

- Dig Tube Protector with an internal ledge.
- The internal ledge protects the end of tube from debris, wear and collapsing.
- Dramatically increases the life of the dig tube.
- Includes mounting bolts, washers, and nuts for easy installation.
Note: Color may vary from pictured

As low as: $101.50

RIPSAW

(CALL FOR LOWER PRICING!) RIPSAW TURBO NOZZLE, 18deg SPRAY,

- The RIPSAW blasts a 0° straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18° cone of coverage.
- Constructed with a stainless steel housing and tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles.
- Non-conductive urethane coating on the nozzle body protects users from electrocution.
- Repair kits available!

As low as: $255.00

RIPSAWKIT

(CALL FOR LOWER PRICING!) RIPSAW TURBO NOZZLE REBUILD KIT

Repair kits are available for extended nozzle life and lower overall operating costs. Kit includes inlet screen, rotor assembly, insert, and seat retainer.

As low as: $128.00

RIPSAW-HD

(CALL FOR LOWER PRICING!) RIPSAW HD TURBO NOZZLE, 18deg SPRA

- Heavy duty urethane coating!
- The RIPSAW blasts a 0° straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18° cone of coverage.
- Constructed with a stainless steel housing and tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles.
- Non-conductive urethane coating on the nozzle body protects users from electrocution.
- Repair kits available!

As low as: $295.00

WEDGEBLASTER

WEDGE BLASTER TRENCHING NOZZLE, 1/2in FNPT

• Standard 1/2" Female NPT Connection
• Three High Impact 0° Nozzles
• Urethane Coated for Durability and Operator Protection
• Stainless Steel Body, Hardened Stainless Nozzle Inserts for Long Life
• Easily Change Worn Nozzles
• Dimensions: 1 3/4" Long x 2 1/4" Wide
• Flow to 30 Gpm, Pressure to 4,000 PSI
*Specify GPM and PSI when ordering!

$145.20

ST-601

ST-601 LINEAR SPRAY GUN, 4000psi, 12gpm, 3/8 INLET, 1/4 OUT

• Horizontal flow-through design.
• Forged brass housing for maximum strength.
• Unitized valve for easy repair.
• Stainless steel spring, needle, ball and seat.

$31.25

DCG5010HE

DCG5010HE REVERSE SPRAY GUN, 5000psi, 10.5gpm, 3/8IN, 1/4OUT

Reversed inlet / outlet make digging easier and faster!
5000psi, 10.5gpm, 3/8" IN, 1/4" OUT

$38.25